1 Can you recommend hydraulic hangar door width and height for: Falcon 10x Gulfstream 700 Gulfstream G650 Cessna Citation X PC-24 Pilatus P-12. Hangar located in Missouri
2 Hello, I'm a designer w/ Woolpert, I have a 16' high by 80' long hangar door, that I need some specs to design to. We want a hydraulic system. and some glazed panels. We need to know the power requirements, the header requirements, and any other framing that may be necessary around schweiss hydraulic doors in Colorado. If we could get an architectural specification as well that would be helpful.
3 I would like the contact information of your dealer in Ontario, Canada so that I can get a quote for hydraulic hangar doors as specified.
4 New Hangar Construction. Need a price estimate for hydraulic one piece door 52x16. Hangar door project located in Vegas.
5 Hello I'd like to get a preliminary price for a new hydraulic door. I am putting a budget together for a new hangar in chandler arizona. Thanks
6 Want a schweiss hydraulic hangar door quote with install
7 Need hydraulic hangar doors - 58x16 door quote and 48x16 door quote
8 I would like a quote on a 1 piece hydraulic hangar door. 14' x 55' in size. Hangar located in North Texas
9 Need to get a spec sheet for a 46'-0"x18'0" Single Panel Hanger Door basis of design: Hydraulic Doors. Prefer email if possible but phone call is fine if needed.
10 We are developing a new airport scheduled for 110 hangers over the next 24 months. We are looking for door and hydraulic options.
11 Building a new hangar 64Wx60Lx38H. I would like the largest door possible? Please advise.
12 Requesting a quote for 70x20 hanger door
13 We are looking for a quote for two hydraulic aircraft doors (or an option for bifold) for a new hangar project at the Municipal Airfield in Bowling Green, Missouri. One door is 60' wide with a 18' clear opening, other door is 80' wide with a 18' clear opening.
14 Need pricing and who I need to deal with for my territory. (2) 50x20 hydraulic doors
15 Quoting a new hangar project in Hager City WI. requires hydraulic door 110' wide by 28' high. What would be the clear height of this opening be with your product? Thanks
16 We are building a new hanger with 3 hydraulic power lifted doors 38’6†x11â€. Can you provide pricing and lead times. Thank you.
17 I am looking at building a hangar for a Maule MT7 235 and my contact at Bigbee gave me your info to contact about a door. The Wingspan on my plane is 33 ft and its 8.3 ft tall. Not exactly sure what width the building would need to be in order to allow for your door. I assume I would want a few feet clearance on either side of the wings as far as door size, so not sure what that would make the building width be? Any advice?
18 Looking for a hangar door. 65x20 hydraulic lift door
19 We currently bidding a hanger build for a customer and need pricing and time frame. We erect steel weld-up structures and this project is a 35x60x14 tall hanger with a 12x42 Hydraulic door.
20 I need a 40x12 hydraulic hangar door. Am I right in my thinking that with your door I can get nearly a floor to ceiling opening? If my ceiling height is 12 feet my door will hinge at the top and open 12 feet tall? Where does the weight of the door bear in the opening? It seems like just at each side of the opening? Can you send me a sketch of the door opening framing? How long will it take to get my door once I order it? Can you quote me a price? Thank you. Jerry
21 NEED TO DISCUSS A BI-FOLD DOOR. DOOR OPENING SIZE IS 40FT WIDE AND 10 FT. HIGH. HAVE SOMEONE CALL ME ON MY CELL PHONE. THIS WILL BE GOING IN A WOOD STICK BUILT BUILDING.
22 I am looking to retro fit a standing hangar. I will need four hydro lifting Schweiss doors. The doors will be 55' wide and 17' high. Schweiss doors come in a pre built frame and hang within that frame to support their own weight? Please advise as to the above, as well as cost and delivery times, deposits and any other information.
