1 Looking to replace Gauge#22 Aluminum Roll Up Door with Motor and Steel Jamb (10ft High x 8.5ft Width) - 1 unit

2 Looking to convert an existing bi-fold door to a hydraulic. Current door is 75'x20', with approximately 18' clear, made by Wilson Industrial Doors. Owner is looking to have 20' clear opening.

3 I have an older building that I would like to retrofit the doors on. Currently it has sliding doors and I would like to use a schweiss hydraulic or bifolding door. What sort of structure is require since this is an existing building?

4 What would be ballpark price on upgrading a cable lifted door? Door now has a single motor, and six 1/4" cables. Measures 60' wide and 14' of clearance when open. Aircraft hanger. I believe it is a "Colorado Door Fabricators" door, no longer in business.

5 I'm looking for some additional information on the bifold door style. I have a project in upstate New York that is looking to replace two hangar doors with something a bit better. That's where your Schweiss Bifold strap door comes into the picture. Would you have something available that is around 16 foot wide and offers a 14' clear height in a 15' rough opening? Thanks!

6 I have a shop with an apartment above it, and it's an oddball opening. The opening is just under 18' wide and 14' tall, but that doesn't leave any headroom for springs or whatever. I can send pics, but with either the custom made bifold or hydraulic shop doors you offer it should work. I have had regular garage doors outfits come take a look and they weren't cheap so I might as well look at something cool like your Schweiss doors.

7 My sliding doors were blown off during a large storm and I figured I may as well upgrade with a new 30' hydraulic door.

8 Looking for a hydraulic door to retrofit the sliding doors on my shop. The opening is 9' high by 12 " wide. I would like windows and have it insulated. Thanks

9 I bought a hangar with an Erect-a-Tube door operated by nasty old frayed cables that look like they are about to break. I'd like to convert it to your safe bifold strap system-is this possible?  I'd like to get a cost estimate for this if you can do it. I don't want to replace the entire door, but just have someone come out and install the strap system. Please call or email with info.

10 We have three Hi-fold doors and they all use cables for lifting the door. I was wondering if it was at all possible to retro fit our cable doors with your unique strap system. I'm sick of replacing cables. I do about one to two on each door a year. the door dimensions are 40'x17', 40'x17', and 44'x17'.

11 I HAVE A CABLE LIFT DOOR THAT I PURCHASED FROM ANOTHER COMPANY IN ABOUT 1990. SOME HOW IT HAS SHIFTED TO ONE SIDE AND THE ROLLERS ARE BARELY CATCHING ON ONE SIDE WHEN THE DOOR IS DOWN. PLEASE E-MAIL ME OR CALL ME IF YOU HAVE A SCHWEISS LIFTSTRAP CONVERSION SOLUTION FOR THIS. ALSO WAS WONDERING WHAT IT WOULD COST TO CONVERT MY 30FT X 16FT DOOR TO STRAP LIFT SYSTEM. THANKS!!